Saturn Evolution Maple-Walnut
The iconic Saturn Maple/Walnut hybrid shell has been appointed with Design Lab features and SoniClear Attenuation System to deliver a fuller, rounder tone with bright, versatile, open sound.
Saturn Evolution Maple-Walnut
-
SE628XM Workhorse Maple 5-Pc Shell Pack
-
SE529XM Rock Maple 4-Pc Shell Pack
-
SE529XEM Classic Maple 4-Pc Shell Pack
-
SE504XM Fusion Maple 4-Pc Shell Pack
-
Exotic Aegean Fade (OE)
-
Exotic Night Forest Burst (MZ)
-
Tuscan Red Lacquer (PA)
-
Gun Metal Grey Lacquer (PG)
-
Piano Black Lacquer (PB)
-
Exotic Azure Burst Lacquer (PT)
-
Tuscan Yellow Lacquer (PM)
-
Iridium Silver Lacquer (PD)
-
Polar White Lacquer (PI)
-
Exotic Violet Burst Lacquer (PZ)
-
Brunswick Green Lacquer (PQ)
-
Exotic Sunburst Lacquer (PO)
SAS (SONIClear Attenuation System) Finish
The Natural Satin SAS Finish brings out the beautiful character of the woods used in the drums but also allows the shell to vibrate fully due to its extremely low-mass application. Thicker finishes like high-gloss add mass to the shell and shorten sustain. Future Design Lab models may employ a thicker finish to create a more focused sound.
FEATURES
Halo Mounting System
The revolutionary new "Halo" mount featured on all Saturn Evolution toms, unlocks the freedom of full resonance. Using a lateral, unique "under lug-line" suspension system, this new groundbreaking isolation mount allows the shell the freedom to have an open, pure tone. This is done with minimal stiffness usually associated with under hoop mounting systems.
Adjustment Knob
With the rubber gasket inside the mount, you can screw the knob down fully to dampen the shell resonance for a shorter decay, or back it off for a wide, open tone. In the studio, this allows you to "pre-EQ" your drums before feeding them into your plug-ins.
Maple/Walnut Hybrid Shell
The iconic Saturn Maple/Walnut hybrid shell has been appointed with Design Lab features and SoniClear Attenuation System to deliver a fuller, rounder tone with bright, versatile, open sound.
Chamber Specific Design
Plies get progressively thicker, depths graduate by 1/2”, and bearing edges change as the drums get larger in diameter. The combination of all of these details creates an amazing symphony in one kit, where each and every drum sounds perfect!
SPECIFICATIONS
Saturn Evolution | |
---|---|
Mounting System | Halo Mounting System |
Shell | Maple and Walnut Hybrid Shell |
SAS 0-1 (PD, PM, PA, PG, PQ, PI, PB) | Toms (8", 10"): 8-Ply, 7.5mm Toms (12", 13", 14"), and Floor Toms (14", 16", 18"): 8-Ply, 8.2mm Bass Drum: 8-Ply, 8.9mm |
SAS 2 (MZ, OE, PO, PT, PZ) | Toms (8", 10"): 9-Ply, 7.85mm Toms (12", 13", 14"), and Floor Toms (14", 16", 18"): 9-Ply, 8.55mm Bass Drum: 9-Ply, 9.25mm |
Hardware | Chrome / Black Brushed Hardware |
Hoops | Mapex Sonic Saver Hoops |
Mapex SONIClear™ Bearing Edge: | 45° on Toms, and Floor Toms 60° on Bass Drum |
Air Flow Venting | 2 Vent Holes on Toms and Floor Toms 4 Vent Holes on Bass Drum |
Floor Tom Legs | SAS Static 90 Degree Floor Tom Legs Sonic Pedestal Floor Tom Feet |